Answer
Please follow the below guide to set up WOL function.
1. To enable WOL in BIOS, please access “Power Managenet Setup” of “Advanced” in BIOS setup to set “Resume By PCI/PCI-E/Lan PME” [Enabled],”EUP Function”[Disabled], Save & Exit CMOS Setup.
2. To enable WOL in Windows, right-click “My Computer “ icon, select Properties, then click on “Device Manager”. Find your network adapters in the hardware list, right-click it and click Properties again.
3. Go to the Power Management tab and tick “Allow this device to wake up the computer” item.
4. Now head to the Advanced tab, which is full of options for your network adapter. First please set the value of “Shutdown wake up” to “Enabled” ,second please set the value of “Wake Up Capabilities” to “Magic Packet & Pattern Match”, then click “OK” and everthing should be set.
5. You can use Magic Packet to wake up your system from a subnet different system.
*Please note that above LAN setting under Windows 7 for example.
|