This site uses cookies to only capture URL parameters, count visitor number, share functions and etc.
Please visit ECS's Privacy Policy for further information.
By continue browsing our website, you are hereby aware of and agree on ECS' use of cookies by clicking 'ok'.
OK

Notebook

產品名稱 產品版本 FAQ Type 最近一次更新
A900  V2.1  General FAQ
Application 
2003/01/01 

問題
We have encountered a problem running RedHat Linux 7.1, RedHat Linux 7.2, and Mandrake 8.0.
1. While configuring, the XF86VGA screen goes off completely and there's no display, and
2. Which type of TFT should be configured when it asks for a monitor setting?
3. Are there any modem drivers for it under the Linux Operating System?


回答
Please use the Frame Buffer Mode and please refer to the setting procedure below:
1. After you have installed the Linux OS, press "Ctrl+X" under the Linux logo image, then key in "linux 3" to enter text mode.
2. Please edit /etc/lilo.conf: please key "vi /etc/lilo.conf" then add vga=791, and please refer to the text below:
boot=/dev/hdamap=/boot/mapinstall=/boot/boot.bvga=791prompttimeout=50message=/boot/messagelineardefault=linuximage=/boot/vmlinuz-2.4.2-2 label=linux read-only root=/dev/hda5
When you have edited the file, please press "ESC" and key in ":wq" to save this file.
3. Edit/etc/X11/XF86Config-
4: Key in "cd /etc/X11" then type "vi XF86Config-4" to edit the file; please refer below:
Section "Device" # no known options Identifier "SiS 630" Driver "sis" VendorName "SiS 630" BoardName "SiS 630" #BusIDEndSectionSection "Device" # no known options Identifier "Linux Frame Buffer" Driver "fbdev" VendorName "SiS 630" BoardName "SiS 630" #BusIDEndSectionSection "